1-/ HOT ROLLED STEEL COILS & PLATES
Short Code: HRC / HRS
Surface Treatment: Pickling and Oiling Applicable
Thickness: Minimum 1,40 mm – Maximum 100 mm
Width Range: Minimum 25 mm (slit coil) – Maximum 2000 mm
Coil Inner Diameter: 508 mm or 610 mm
Maximum Coil Weight: 25 Tons
Intended applications, standards and material grades:
1-/ Deep drawing and cold forming.
- Standard: EN 10111:2008
- Grade: DD11 – DD12 – DD13 – DD14
2-/ Low and medium strength carbon steels (automotive industry, pipe and machine parts production).
- Standard: SAE J403-2014
- Grade: SAE 1006 – 1008 – 1010 – 1012 – 1015.
3-/ Hot rolled steels for pressure purposes (boilers, steam boiler
plants, pressure vessels, etc.) at elevated temperatures.
- Standard: EN 10028-2:2017
- Grade: P235GH – P265GH – P295GH – P355NH
4-/ Hot-rolled non-alloy structural steels intended for use in the manufacturing of construction equipment, industrial machinery, mechanical components, structural plate, automotive and rail transportation systems.
- Standard: EN 10025-2:2019
- Grade: S235JR+AR or S235J2 or S235J2+N – S275JR +AR or S275J2 – S355JR
5-/ Medium and high strength low alloyed steels suitable for cold forming for manufacture of chassis, cranes, trailers and railings.
- Standard: EN 10149-2:2013
- Grade: S315MC – S355MC – S420MC – S460MC – S500MC – S550MC – S600MC – S700MC
6-/ Hot rolled boron alloyed steels for manufacturing of agricultural equipment.
- Standard: EN 10083-3:2006
- Grade: 22MnB5 – 26MnB5 – 30MnB5
2-/ COLD ROLLED STEEL COILS & SHEETS
Short Code: CRC / CRS
Surface Treatment: Oil
Thickness: Minimum 0,28 mm – Maximum 3,00 mm
Width Range: Minimum 25 mm (slit coil) – Maximum 2000 mm
Coil Inner Diameter: 508 mm or 610 mm
Maximum Coil Weight: 25 Tons
Intended applications, standards and material grades:
1-/ General Application Steels for Deep-Drawing Processes in Automotive, Refrigeration, and Domestic Appliance Manufacturing.
- Standard: EN 10130:2006
- Grade: DC01 – DC03 – DC04 – DC05 – DC06
2-/ Cold rolled steels for enamel coating.
- Standard: EN 10209:2013
- Grade: DC01EK – DC03EK – DC04EK – DC04ED – DC06EK – DC06ED
3-/ General application steels for cold forming.
- Standard: SAE J403-2014/ ASTM A1008-16
- Grade: SAE 1006 – 1008 – 1010 – 1012 – 1018
4-/ Cold rolled bake-hardening high yield strength steel for cold forming.
- Standard: EN 10268:2006+A1:2013
- Grade: HC220B – HC260B
5-/ Cold rolled high yield strength dual-phase steel for cold forming.
- Standard: EN 10338:2015
- Grade: HCT490X – HCT590X
6-/ High strength steels for cold forming.
- Standard: EN 10268:2006+A1:2013
- Grade: HC260LA – HC300LA – HC340LA – HC380LA – HC420LA – HC460LA – HC500LA
3-/ COATED STEEL COILS & SHEETS
Short Code: HDG(Z), Al-Si(AS), Al-Zinc(AZ), Galfan(GF), Galvalume(GU), Galvannealed(ZF)
Surface Treatment: Oil, Chromate or Easyfilm
Coating:
Galvanize: Zinc(100%)
Al-Si: Aluminum(90%) + Silicon(10%)
Galfan: Aluminum(5%) + Zinc(95%)
Galvalume: Aluminum(55%) + Zinc(43,5%) + Silicon(1,5%)
Galvannealed: Zinc(90%) + Iron(10%)
Thickness: Minimum 0,28 mm – Maximum 6,00 mm
Width Range: Minimum 25 mm (slit coil) – Maximum 2000 mm
Coil Inner Diameter: 508 mm or 610 mm
Maximum Coil Weight: 25 Tons
Intended applications, standards and material grades:
1-/ Zinc coated (HDG-galvanized) low carbon steels for cold forming
- Standard: EN 10346:2015
- Grade: DX51D – DX52D – DX53D – DX54D – DX56D – DX57D
2-/ Bake hardening steel
- Standard: EN 10346:2015
- Grade: HX180BD – HX220BD – HX260BD – HX300BD
3-/ Structural steels
- Standard: EN 10346:2015
- Grade: S220GD – S250GD – S280GD – S320GD – S350GD
4-/ High strength, low alloyed for cold forming
- Standard: EN 10346:2015
- Grade: HX260LAD – HX300LAD – HX340LAD – HX380LAD – HX420LAD – HX460LAD – HX500LAD
5-/ Dual-phase steel with high yield strength for cold forming
- Standard: EN 10346:2015
- Grade: HCT490X – HCT590X – HCT780X – FEE600DP – HCT980X
6-/ Galvannealed low carbon steels for cold forming
- Standard: TSG3109G
- Grade: SCGA270C – SCGA270D
4-/ QUALITY KEY
