1-/ WIRE RODS
Short Code: Wire Rods / Fil machine
Diameter Minimum 5,50 mm – Maximum 20,00 mm
End Usage Area & Grades:
- Wire Drawing: SAE 1005 / SAE 1006 / SAE 1008 / SAE 1010
- Welded Wire Mesh: SAE 1008 / SAE 1010 / SAE 1012 / SAE 1015
- Cold Drawing: SAE 1018 / SAE 1022 / SAE 1026 / SAE 1030 / SAE 1040
- Spring Steel: SAE 1045 / SAE 1070
- Welding Electrodes: S1 / SG2 / SG3
- Bolt and Nuts: SAE 1006C / 20MnB4 / 27MnB4 / 30MnB4
2-/ PC STRAND WIRE
Short Code: PC Strand / Prestressed Concrete Wire
Sectors:
- Construction
- Engineering Projects
- Bridge / Viaduct beams
Diameter: 9,53 mm / 12,7 mm / 15,2 mm / 15,7 mm
Tensile Strength: 1860 Mpa
Standards: EN 10138-3
Lay Direction: S or Z
3-/ LOW & HIGH CARBON WIRES
Short Code: Wire In Coils
Sectors:
- Construction
- Production of nails, mesh and reinforced concrete structures
Raw Material Standard: SAE 1006, SAE 1008, SAE 1010, SAE 1018
Types:
- Bright Wire:
Product Standard: EN 10218
Wire Diameter: 1,50 mm – 18 mm
Suitable For: Welding, folding
- Cold Drawn Steel Wire:
Product Standard: EN 10218
Wire Diameter: 1,50 mm – 18 mm
Suitable For: Welding, folding
- Hot Dip Galvanized Wires
Product Standard: EN 10244-2
Wire Diameter: 0,80 mm – 10 mm
Coating: 30 g/m2 – 150 g/m2
Suitable For: Mesh wire, pvc coated wire, wire staples.
- Electro Galvanized Wires:
Product Standard: EN 10244
Wire Diameter: 3,00 mm – 12 mm
Coating: 25 g/m2 – 80 g/m2
Suitable For: Mesh wire, pvc coated wire, wire staples.
- Copper Coated Wire:
Product Standard: EN 10244-6
Wire Diameter: 1,50 mm – 8,00 mm
Suitable For: Stitching wire, binding wires, pins and clips.
- Cold Heading Wires Annealed Phosphated Screw Wires:
Product Standard: EN 10218
Wire Diameter: 2,00 mm – 18,00 mm
Suitable For: Screw, bolt and nut manufacturing
4-/ Espagnolette Flat Drawn Wıre
Short Code: Flat Wire For Pan Support & Top Oven Grids
Sectors:
- PVC door and window manufacturers
- White goods manufacturers
Product Standard: EN 10139
Raw Material Standard: SAE 1006
Width and Height Range: 2,00 mm – 18,00 mm
Suitable For: Door and window lock system and oven grid manufacturing.
5-/ WIRE MESH PRODUCTS
Short Code: Wire Mesh
Sectors:
- Construction
- Industrial structures
- Fence and decorative purpose
Raw Material Standard: SAE 1006 / SAE 1008
R Type:
Diameter Range: 4 mm – 12 mm
Mesh Size: 150 mm – 250 mm
Width: Minimum 750 mm – Maximum 2300 mm
Length: Minimum 2400 mm – Maximum 9000 mm
Q Type:
Diameter Range: 4 mm – 12 mm
Mesh Size: 150 mm – 150 mm
Width: Minimum 750 mm – Maximum 2300 mm
Length: Minimum 2400 mm – Maximum 9000 mm
